Audio Selectors & Control

 

AUD-0812-01-x Audio Control Module, 8 In / 12 Out

   Audio International's AUD-0812-01-x is a cabin audio control module that can be configured to accept up to eight inputs.  The module has eight independent stereo audio inputs and 12 independent stereo audio outputs.  Any of the eight audio source inputs may be routed to any of the 12 audio source outputs, and all outputs are capable of providing output for the same single audio input source concurrently.  Each audio output is capable of driving either a cabin audio interface module (i.e., equalizer, power amplifier, etc.) or an entertainment headphone audio switch panel.
   The AUD-0812-01-x provides for PA audio interface capability.  The unit provides a PA keyline connection that allows for redirection of the PA audio input to the 12 entertainment audio source outputs at the same time when active.  This input may also function effectively as an audio mute input if no PA audio source is connected to the PA audio input interface.

The “-x” suffix designates the type of connector utilized;
“-1” = Positronic and “-2” = D-Subminiature.

 

 

Weight: 1.7 lb / 0.77kg, approximate
Dimensions: 6.5" x 6.9" x 2.0" / 16.5cm x 17.5cm x 5.1cm (l,w,h)
Power Requirements: 2.5A @ +28 Vdc, normal;  4.0A @ +28 Vdc, maximum
Documentation: Drawings/Spec Sheet        Installation Manual  

 

AIS-2A Audio Source Selector
The AIS-2A is a two Stereo Source Audio Selector.  It accepts two stereo signals, low or high level, and selects one for output using momentary ground logic input.  A momentary ground pulse will select the next audio source.  Status annunciator outputs are available for indicating which source is selected.  Each audio source input has independent gain adjustments for source input level adjustment.  This unit is ideal for selecting and adjusting the levels of source equipment in simple entertainment systems. 

Identical to AIS-2 except with momentary logic instead of constant ground source selection
.
 
Weight: 0.50 lb / 0.23kg
Dimensions: 3.1" x 5.0" x 1.1" / 7.9cm x 12.7cm x 2.8cm (l,w,h)
Power Requirements: 100 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual  

 

AIS-2 Audio Source Selector
It accepts two stereo signals, low or high level, and selects one for output using constant ground logic input.  The presence of a ground will select audio source number two and the absence of a ground automatically selects audio source number one.  Each audio source input has independent gain adjustments for source input level adjustments.  This unit is ideal for selecting and adjusting the levels of source equipment in simple entertainment arrangements.
Weight: 0.50 lb / 0.23kg
Dimensions: 3.1" x 5.0" x 1.05" / 7.9cm x 12.7cm x 2.67cm (l,w,h)
Power Requirements: 100 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual 

 

ACM-8-01-x Audio Control Unit
Provides input buffering and level control for eight stereo audio sources. An eight position stereo switch arrangement included to allow one of the eight inputs to be selected. Provisions are provided for PA audio override input.

The “-x” suffix designates the type of connector utilized;                          “-1” = Positronic and “-2” = D-Subminiature.
 
Weight: 0.8 lb / 0.36 kg
Dimensions: 3.2" x 7.8" x 1.4" / 8.13cm x 19.56cm x 3.56cm (l,w,h)
Power Requirements: 250 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet      Installation Manual       

 

ACM-5-CA Cabin Audio Selector
   It provides individual audio selection and volume control at each seat location or to speaker amplifier and will select up to five different audio sources.  For versatility, the module is designed with a user-accessible dip switch for audio source select control.  This unit is ideal for simple audio distribution systems due to its small size and easy interface capabilities. 

Identical to ACM-5 except with 10 k-ohm input impedance.
 
Weight: 0.65 lb / 0.29kg
Dimensions: 3.14" x 7.1" x 1.15" / 7.98cm x 18.03cm x 2.92cm (l,w,h)
Power Requirements: 500 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual  

 

ACM-5 Audio Control Module
   It provides individual audio selection and volume control at each seat location or to speaker amplifier and will select up to five different audio sources.  For versatility, the module is designed with a user-accessible dip switch for audio source select control.  This unit is ideal for simple audio distribution systems due to its small size and easy interface capabilities.
Weight: 0.65 lb / 0.29kg
Dimensions: 3.14" x 7.1" x 1.15" / 7.98cm x 18.03cm x 2.92cm (l,w,h)
Power Requirements: 500 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual    



Back to the Top...