Lighting Control Modules

Lighting Control Modules

MSM282

2-Channel Indirect Lighting Control

The MSM282 is a 2-channel indirect lighting controller that consists of two individual channels and interfaces with lighting modules using control signals. It is designed to operate with indirect lighting modules with control signal inputs. This module provides the proper on/off and bright/dim output for indirect lighting.

Weight:

0.5 lb / 0.23 kg

Dimensions:

3.1" x 5.0" x 1.05" / 7.87cm x 12.7cm x 2.67cm (l,w,h)

Power Requirements:

200 mA @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM282B

2-Channel Indirect Lighting Control

The MSM282B is a 2-channel indirect lighting controller that consists of two individual channels and interfaces with lighting modules using control signals. It is designed to operate with indirect lighting modules with control signal inputs. This module provides the proper on/off and bright/dim output for indirect lighting.

Same as MSM282 with Set and Reset Inputs.

Weight:

0.5 lb / 0.23 kg

Dimensions:

3.1" x 5.0" x 1.05" / 7.87cm x 12.7cm x 2.67cm (l,w,h)

Power Requirements:

200 mA @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM2804-4

Dual Indirect Light Sequencing Control

The MSM2804-4 is a indirect light sequencing module that provides the proper on/off and bright/dim output for indirect lighting. The module is configured for off/bright/dim. The MSM2804-4 is very useful for single button lighting control. All three steps (off, bright, dim) are controlled by one button. This arrangement helps to eliminate switch button positions for a smaller profile. One module can operate two sets of lights independently.

Weight:

0.56 lb / 0.25 kg

Dimensions:

4.0" x 6.5" x 1.0" / 10.16cm x 16.51cm x 2.54cm (l,w,h)

Power Requirements:

750 mA @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM2871

Fluorescent Lighting Control

The MSM2871 is a discrete control module especially designed for lavatory lighting and water heater control. The unit provides on/off and bright/dim control for two separate sets of indirect light ballast units. The unit also provides a read light control, on/off control, and three temperature level controls for a water heater.

Weight:

0.5 lb / 0.23 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

780 mA @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM2929-01-x

4-Channel Light Control Module

The MSM2929-01-x provides the necessary on/off and variable bright/dim output for indirect lighting control. The module has four independent discrete-step 5 k-ohm potentiometers and four power relays. The module may be controlled via discrete inputs or may be connected to AI’s proprietary RS-485 serial data bus.

The “-x” suffix designates the type of connector utilized;
“-1” = Positronic and “-2” = D-Subminiature.

Weight:

1.5 lb / 0.68 kg

Dimensions:

6.86" x 6.53" x 1.35" / 17.42cm x 6.59cm x 3.43cm ( l,w,h)

Power Requirements:

200 mA @ +28 Vdc

Documentation:

Drawings/Spec Sheet Installation Manual

MSM295

Dual Variable Lighting Control

The MSM295 is a two channel, one amp, on/off and variable bright/dim controller designed to turn on/off and vary the intensity of lamps used in reading, table, or other lighting situations. The controller uses a pulse width modulator circuit for power efficiency. The controller is designed with master on/off, bright, and dim functions in addition to the individual control inputs.

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2 A @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM295A

Variable Bright/ Dim Lighting Controller

The MSM295A is a two-channel variable bright/dim lighting controller. The controller is designed to turn ON/OFF and vary the intensity of lamps used in reading, table, or other lighting situations. The two-channel design allows control of two lamps from a single MSM295A. The unit uses a pulse width modulator circuit for power efficiency. The controller has Master ON/OFF, bright, and dim functions that override the individual control inputs.

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2.5 A @ +28 Vdc

Documentation:

Drawings/Spec Sheets Inst. & Operation Manual

MSM295C

Variable Bright/ Dim Lighting Controller

The MSM295C is a two-channel variable bright/dim lighting controller. The controller is designed to turn ON/OFF and vary the intensity of lamps used in reading, table, or other lighting situations. The two-channel design allows control of two lamps from a single MSM295C. The unit uses a pulse width modulator circuit for power efficiency. The controller has Master ON/OFF, bright, and dim functions that override the individual control inputs.

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2.5 A @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM295D

Variable Bright/ Dim Lighting Controller

Similar to the MSM295C but has three input controls for each circuit. On/off, Bright/Dim and output to light the status annunciator LED in a switch panel when lamp is on. The MSM295D is a two-channel variable bright/dim lighting controller. The controller is designed to turn ON/OFF and vary the intensity of lamps used in reading, table, or other lighting situations. The two-channel design allows control of two lamps from a single MSM295D. The unit uses a pulse width modulator circuit for power efficiency. The controller has Master ON/OFF, bright, and dim functions that override the individual control inputs

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2.5 A @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM295E

Variable Bright/ Dim Lighting Controller

Similar to the MSM295D but has no switch controls for the on/off function of the individual or master circuits. The MSM295E is a two-channel variable bright/dim lighting controller. The controller is designed to vary the intensity of lamps used in reading, table, or other lighting situations. The two-channel design allows control of two lamps from a single MSM295E. The unit uses a pulse width modulator circuit for power efficiency. The controller has Master BRIGHT and DIM functions that override the individual control inputs. There are no switch controls for ON/OFF function of the individual or Master circuits.

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2.5 A @ +28 Vdc

Documentation:

Drawings/Tech. Sheet Inst. & Operation Manual

MSM295F

Variable Bright/ Dim Lighting Controller

The MSM295F is a two-channel, one amp, variable bright/dim controller designed to vary the intensity of lamps used in reading, table, or other lighting situations. The circuit uses a pulse width modulator circuit for power efficiency. The controller is designed with master on/off, bright, and dim functions in addition to the individual control inputs.

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2 A @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM295G

Variable Bright/ Dim Lighting Controller

Similar to the MSM295D but has three input controls for each circuit. On/off, Bright/Dim and output to light the status annunciator LED in a switch panel when lamp is on. The MSM295G is a two-channel variable bright/dim lighting controller. The controller is designed to turn ON/OFF and vary the intensity of lamps used in reading, table, or other lighting situations. The two-channel design allows control of two lamps from a single MSM295G. The unit uses a pulse width modulator circuit for power efficiency. The controller has Master ON/OFF, bright, and dim functions that override the individual control inputs.

Weight:

0.45 lb / 3.27 kg

Dimensions:

5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54cm (l,w,h)

Power Requirements:

2.5 A @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM-9645

Switching for Fluorescent Lighting

The MSM-9645 power switching control module provides remote located switching for cabin fluorescent lighting and temperature control. The control module features dual tracking 300-ohm potentiometers for cabin temperature control, cabin and lavatory fluorescent lights on/off and dimming control, and monitor on/off control. The MSM-9645 utilizes the Audio International, Inc. proprietary RS-485 serial data bus 1 (DB1) structure.

Weight:

1.1 lb / 0.5 kg

Dimensions:

5.13" x 6.71" x 1.3" / 13.03cm x 17.04cm x 3.3cm (l,w,h)

Power Requirements:

350 mA @ +28 Vdc

Documentation:

Drawings/Spec Sheet Inst. & Operation Manual

MSM-9660

Power Switching Module

Provides remote located switching for lights, monitor power switching, and cabin temperature control. Features include on/off, bright/dim for 2 sets lighting systems, on/off aisle and vanity lighting control, on/off control for 2 monitors, and 1K-ohm potentiometer temperature control.

Weight:

1.1 lb / 0.5 kg

Dimensions:

5.13" x 6.71" x 1.3" / 13.03cm x 17.04cm x 3.3cm (l, w, h)

Power Requirements:

1 A @ +28 Vdc MAX, fused

Documentation:

Drawings/Spec Sheets Inst. & Operation Manual

Back to the Top...