Conditioning Filters  
                and
 Isolation Modules

 



ISO-1-600 Audio Isolation Transformer
High quality component, useful for reducing or eliminating system electrical noise associated with ground loops before amplification.
600 ohm primary and secondary impedance. 20Hz to 20 kHz Frequency Response. 		 
Weight: 2.4 oz. / 0.07 kg
Dimensions: 2.0" x 0.75" dia. / 5.1 x 1.9 cm
Power Requirements: Low Level Audio ONLY (100 mV to 1 V)
Documentation: Drawings/Spec Sheet   


PCF-100-2 Power Conditioning Filter

The PCF-100-2 is a high quality power-conditioning filter that takes DC power and removes the AC 400Hz noise and interference associated with this power.  The PCF-100-2 Power Conditioning Filter outputs a clean conditioned power signal up to 13 amps.  The filter can be utilized on AI’s source equipment, powered amplifiers and modules that require +28 Vdc.  This unit is totally enclosed in an aluminum chassis that is connected to aircraft ground.  An external grounding lug is provided for bonding to the aircraft frame.  This will shunt any possible high frequency interference that may be produced by the power supply to ground potential.

  
Weight: 1.7 lb / 0.77 kg
Dimensions: 3.78" x 6.95" x 1.92" / 9.6cm x 17.65cm x 4.88cm (l,w,h)
Power Requirements: 13 A @ +28 Vdc
Documentation: Drawings/Spec Sheet

 

VCF-101-01-x Video Conditioning Filter

Audio International’s VCF-101-01-x is a video conditioning filter designed to minimize video tearing caused by DC offset created by isolation transformers handling ground loop noise.  In the recommended installation, the unit receives video signals from the source equipment (such as a VCP or DVD), filters the signals to the audio/video module (such as an LCD monitor), and enables viewers to enjoy a high-quality display without sacrificing audio or video performance. 

Simple design allows for versatile connection options; the VCF-101-01-x can be mounted in either a horizontal or vertical position with no loss of functionality.  It comes in a brushed aluminum housing with iridite finish.

The “-x” suffix denotes the type of connector utilized; 
“-1” = Positronic and “-2” = D-Subminiature.
Weight: 1.7 lb / 0.77 kg
Dimensions: 3.6" x 1.63" x 0.88" / 9.14cm x 4.14cm x 2.2cm (l,w,h)
Power Requirements: N/A
Documentation: Drawings/Spec Sheet      Installation Manual

 

Back to the Top...