Multi-Compact Disc Players


MCD-9101-102-x Air Jukebox

    The MCD-9101-102-x is a single compact disc player, with a serial digital interface and multi-disc audio file storage capabilities. It is specifically designed to meet the special requirements of aircraft use. This unit accepts and plays back standard audio CDs and also functions as a pseudo-multiple CD playback device. This enhances the normal operation of a single CD module. It allows the temporary storage of audio content from CD to a non-removable memory (NAND flash). It allows complete control of track selection through a variety of front panel controls and/or RS-485 data bus commands, as well as the ability to control volume via the front control panel. The unit has a high quality output and a full range frequency response of 20 Hz to 20 kHz ± 3 dB. A removable cover bezel (P/N 13901720) allows customization of the unit to other décor.

Note: the cover bezel must be ordered separately.

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic and No Number = D-Subminiature.
Weight: 2.64 lb / 1.2kg
Dimensions: 6.32" x 6.1" x 2.75" / 16.05cm x 15.49cm x 6.99cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc
Documentation: Drawings/Spec Sheet    Inst. & Operation Manual    

 

MCD-9101-102-x / CDEL1018-1 Air Jukebox

    The MCD-9101-102-x/CDEL1018-1 is a single compact disc player, with a serial digital interface and multi-disc audio file storage capabilities. It is specifically designed to meet the special requirements of aircraft use. This unit accepts and plays back standard audio CDs and also functions as a pseudo-multiple CD playback device. This enhances the normal operation of a single CD module. It allows the temporary storage of audio content from CD to a non-removable memory (NAND flash). It allows complete control of track selection through a variety of front panel controls and/or RS-485 data bus commands, as well as the ability to control volume via the front control panel. The unit has a high quality output and a full range frequency response of 20 Hz to 20 kHz ± 3 dB. A removable cover bezel (P/N 13901720) allows customization of the unit to other décor.

Note: the cover bezel must be ordered separately

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic and No Number = D-Subminiature.
Weight: 2.64 lb / 1.2kg
Dimensions: 6.32" x 6.1" x 2.75" / 16.05cm x 15.49cm x 6.99cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc
Documentation: Inst. & Operation Manual 

 

MCD-9101-101-x Air Jukebox

    The MCD-9101-101-x is a single compact disc player, with a serial digital interface and multi-disc audio file storage capabilities. It is specifically designed to meet the special requirements of aircraft use. This unit accepts and plays back standard audio CDs and also functions as a pseudo-multiple CD playback device. This enhances the normal operation of a single CD module. It allows the temporary storage of audio content from CD to a non-removable memory (NAND flash). It allows complete control of track selection through a variety of front panel controls and/or RS-485 data bus commands. The unit has a high quality output and a full range frequency response of 20 Hz to 20 kHz ± 3 dB. A removable cover bezel  (P/N 13901720) allows customization of the unit to other décor.

Note: the cover bezel must be ordered separately.

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic and No Number = D-Subminiature.
Weight: 2.64 lb / 1.2kg
Dimensions: 6.32" x 6.1" x 2.75" / 16.05cm x 15.49cm x 6.99cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc
Documentation: Drawings/Spec Sheet    Inst. & Operation Manual     Marketing Sheet

 

MCD-104-01-x Ten Disc CD Player/Changer

   Audio International’s MCD-104-01-x provides a high-quality system with the capacity of storing and playing up to ten 5-inch CD audio discs all in one convenient unit.  Each CD player/changer is a complete standalone unit including all components necessary for selection and playback of CD media.
   This system is fully compatible with Audio International’s proprietary RS-485 digital data bus control systems and can be optionally controlled by infrared remote (AI-RCx-17xxxx).  Playback options include play/pause, track search, disc search, repeat, and shuffle.  A unique infrared strapping feature allows up to four similar devices to be used in the same system at the same time while maintaining independent control.

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic and "-2" = D-Subminiature.

Weight: 9.25 lb / 4.2 kg
Dimensions: 8.22" x 13.8" x 4.0" / 20.88cm x 35.05cm x 10.16cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc; +18 to +30 Vdc Operating Range
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual    Marketing Data

 

MCD-103-CH-x Ten Disc CD Player System

 The MCD-103-CH-x control head and MCD-102-RU-x remote unit are separate components that comprise the 10-disc CD player/changer system.  When combined, these units provide a  high-quality system that has the capacity of storing up to ten.  5-inch CD audio discs.  The changer unit can be mounted at various angles and locations throughout the aircraft.   The MCD-103-CH-x is equipped with an additional connector that provides for the capability for a remote interface panel [MCD-102-CP-x] to be connected to the CD player/changer system allowing for additional system control.  AI source equipment can be optionally controlled by infrared remote (AI-RC1-170xxx).  Playback options with this remote include play/pause, track search, disc search, repeat, and shuffle.  A unique infrared strapping feature allows up to four similar devices to be used in the same system at the same time while maintaining independent control.  This system is fully compatible with Audio International’s proprietary RS-485 digital data bus control systems. 

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic and "-2" = D-Subminiature.
Weight: 2.35 lb / 1.07kg
Dimensions: 2.30" x 7.38" x 7.84" / 5.8cm x 18.7cm x 19.9cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc; +18 to +30 Vdc Operating Range
Documentation: Drawings/Spec Sheet     Installation Manual    Operation Manual

 

MCD-102-CP-x Ten Disc CD Changer Control Panel
A separate control panel that connects to the MCD-103-CH-x control head to provide remote location control of the 10-disc CD player/changer system. Features compact size and backlit LCD indicator with front panel controls. Power 130mA maximum at +10 Vdc.  12 inch wire bundle.

The “-x” suffix designates the type of connector utilized;                         “-1” = Positronic and "-2" = D-Subminiature.
 
Weight: 0.33lb / 0.15 kg
Dimensions: 1.36" x 5.86" x 0.67" / 3.45cm x 14.88cm x 1.7cm (l,w,h)
Power Requirements: 130 mA @ +10 Vdc
Documentation: Drawings/Spec Sheet     

 

MCD-102-CH-x Ten Disc CD Player System (part of MCD-102-RU-x)

Audio International’s MCD-102-CH (-x) control head and MCD-102-RU (-x) remote unit are separate components that comprise the 10-disc CD player/changer system.  When combined, these units provide for a high-quality system that has the capacity of storing up to ten, 5-inch CD audio discs.  The changer unit can be mounted at various angles and locations throughout the aircraft. 

AI source equipment can be optionally controlled by infrared remote (AI-RCx-17xxxx).  Playback options with this remote include play/pause, track search, disc search, repeat, and shuffle.  A unique infrared strapping feature allows up to four similar devices to be used in the same system at the same time while maintaining independent control.  This system is fully compatible with Audio International’s proprietary RS-485 digital data bus control systems.

 For the MCD-102-CH-x, the “-x” suffix designates the type of connector utilized; “-1” = Positronic and "-2" = D-Subminiature.  For the MCD-102-RU-x, the “-x” suffix designates the type of connector utilized; “-1” = Positronic and "-2" = D-Subminiature with a 12" Flex Cable.  “-3” = Positronic and "-4" = D-Subminiature with a 36" Flex Cable.

 

Weight: 2.06 lb / 0.93 kg
Dimensions: 7.6" x 7.2" x 2.08" / 19.0cm x 18.0cm x 5.28cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc; +18 to +30 Vdc Operating Range
Documentation: Drawings/Spec Sheet        Inst. & Operation Manual   
   Operation Manual              

 

MCD-102-RU-x Ten Disc CD Player System (part of MCD-102-CH-x)
See description above.

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic   and "-2" = D-Subminiature with 12" Flex Cable.
“-3” = Positronic
   and "-4" = D-Subminiature with 36" Flex Cable.
Weight: 5.25 lb / 2.38 kg
Dimensions: 7.3" x 12.6" x 3.6" / 18.5cm x 32.0cm x 9.1cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc; +18 to +30 Vdc Operating Range 
Documentation: Drawings/Spec Sheet         Inst. & Operation Manual      

 

MCD-100-CH-x Ten Disc CD Changer (part of MCD-100-RU-x)

The MCD-100-CH-x control head and MCD-100-RU-x remote unit are separate components that comprise the 10-disc CD player/changer system.  When combined, these units provide for a high-quality system that has the capacity of storing up to ten, 5.0-inch CD audio discs.  The changer unit can be mounted at various angles and locations throughout the aircraft.  AI source equipment can be optionally controlled by infrared remote (AI-RC1-170xxx).  Playback options with this remote include play/pause, track search, disc search, repeat, and shuffle.  A unique infrared strapping feature allows up to four similar devices to be used in the same system at the same time while maintaining independent control.

The “-x” suffix designates the type of connector utilized;                        “-1” = Positronic and No Number = D-Subminiature.
Weight: 2.35 lb / 1.07kg
Dimensions: 7.89" x 7.15" x 2.08" / 20.04cm x 18.16cm x 5.28cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc; +18 to +30 Vdc Operating Range
Documentation: Drawings/Spec Sheet     Operation Manual     Reference Guide

 

MCD-100-RU-x Ten Disc CD Player System (part of MCD-100-CH-x)
See description above.  
Weight: 5.25lb / 2.38kg (Empty); 6.4 lb / 2.9 kg (Fully Loaded)
Dimensions: 7.25" x 14.25" x 3.81" / 18.4cm x 36.2cm x 9.7cm (l,w,h)
Power Requirements: 1 A @ +28 Vdc; +18 to +30 Vdc Operating Range
Documentation: Drawings/Spec Sheet     Operation Manual     Reference Guide

 

Back to the Top...