Midrange/Tweeter Enclosures

 

 
EN-301MT-xx Mid/Tweet Enclosure
The EN-301MT-xx is a high quality mid / tweeter speaker enclosure.  The enclosure contains a 3.5” midrange and a 0.5” tweeter. Excellent with separate woofer installations.

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                         A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 1.6 lb / 0.74 kg
Dimensions: 6.0" x 3.8" x 2.35" / 15.2cm x 9.5cm x 5.7cm (l,w,d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual


EN-302MT-xx Mid/Tweet Enclosure
The EN-302MT-xx is a high quality mid / tweeter speaker enclosure with a 6” Mylar tweeter.  The enclosure contains a 3.5” midrange and a 0.5” tweeter speaker.  This enclosure provides a slightly smaller size and narrower frequency response relative to AI’s EN-301MT speaker enclosure.  This enclosure exhibits excellent frequency response in a lightweight package. 

 The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                        A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 1.5 lb / 0.7 kg
Dimensions: 7.0" x 3.8" x 1.7" / 17.8cm x 9.5cm x 4.4cm (l,w,d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheets       Inst. & Operation Manual


EN-303MT-xx High Quality Mid/Tweet Enclosure
The EN-303MT-xx is a high quality 3.5” mid / tweeter speaker enclosure,  which contains a 3.5” midrange and a 1” tweeter speaker. Identical to the EN-301MT-xx with a higher quality dome.

 The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                        A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 1.7 lb / 0.77 kg
Dimensions: 6.0" x 3.8" x 2.3" / 15.2cm x 9.5cm x 5.7cm (l,w,d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual 


EN-401MT-xx Mid/Tweet Enclosure
The EN-401MT-xx is a high quality midrange/ midbass tweeter speaker enclosure.  This enclosure exhibits excellent frequency response in a lightweight package.  The curved back allows the enclosure to be turned at any angle.

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                        A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 2.5 lb / 1.1 kg
Dimensions: 8.3" x 4.3" x 2.3" / 21.0cm x 11.0cm x 6.5cm (l,w,d)
Power: 60 WRMS
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual


EN-402MT-x Mid/Tweet Enclosure
Same as EN-401MT but with 1" higher quality dome tweeter. 

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                        A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 2.6 lb /1.2 kg
Dimensions: 8.3" x 4.3" x 2.6"/ 21.0cm x 11.0cm x 6.5cm (l,w,d)
Power: 60 WRMS
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual


EN-403MT-xx High Quality Mid/Tweet Enclosure
   High quality 4" midbass and 1" tweeter. Both utilize a neodymium magnetic structure. Frequency response is 125 Hz to 20 kHz. 

 The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                      A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.
Weight: 2.6 lb /1.2 kg
Dimensions: 9.0" x 4.8" x 2.5" / 23.0cm x 12.0cm x 6.3cm (l,w,d)
Power Requirements: 60 WRMS
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual


EN-404MT-xx Mid/Tweet Enclosure
This high end mid/tweeter combo can be used with the subwoofer. 4"midbass and 1" soft material dome tweeter with neodymium magnet structure. Frequency response is 135 Hz to 20 kHz.

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                      A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 2.9 lb / 1.3 kg
Dimensions: 8.5" x 4.6" x 2.5" / 21.6cm x 11.7cm x 6.35cm (l,w,d)
Power: 60 WRMS
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual


EN-405MT-xx Mid/Tweet Enclosure
Infinity Uniplane series tweeter and midrange enclosure. Full range frequency response of 135Hz to 18 kHz, acrylic polymer gel cone, silk dome tweeter, ceramic voice coil. 

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                     
  A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 1.62 lb / 0.73kg
Dimensions: 7.0" x 4.75" x 2.0" / 17.78cm x 12.1cm x 5.08cm (l,w,d)
Power: 60 WRMS
Documentation: Drawings/Spec Sheet           


EN-900MT-xx Mid/Tweet Enclosure
   The EN-900MT-xx is a high quality full range speaker enclosure that encompasses the latest technology in AI speaker enclosure design.  One high quality isodynamic tweeter and one high quality 4.5” mid-bass comprise the driver elements of the EN-900MT-xx. The isodynamic tweeter consists of a membrane of Kapton film with a pattern of aluminum conductors.  This membrane is precisely placed between two rows of neodymium bar magnets.  Additionally, this magnetically shielded isodynamic tweeter offers flared wave guide controls for optimum frequency response and audio directivity. The mid-bass speaker consists of a 4.5” damped polymer composite cone utilizing a hexatech aluminum voice coil and a neodymium vented magnet system.  This mid-bass speaker offers extremely low frequency response perfect for low bass frequency reproduction. To further enhance the low-bass frequency response of the EN-900MT-xx speaker enclosure, a specially designed ported opening is provided.

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                      A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.
Weight: 3.41 lb / 1.55 kg
Dimensions: 10.75" x 4.75" x 3.09" / 27.3cm x 12.1cm x 7.85cm (l,w,d)
Power: 100 WRMS
Documentation: Drawings/Spec Sheet     Installation Manual     Marketing Sheet

 

EN-B40MT-xx Mid/Tweet Enclosure
The EN-B40MT-xx is a high quality 5” coaxial speaker consisting of a mylar tweeter and 5” mid-bass driver. Right and left versions of the same enclosure. Black powder-coat enamel finish.

The first “x” in the "-xx" suffix designates the  enclosure's impedance;
"8" indicates 8 ohm and "4" indicates 4 ohm.
The second "x" designates the type of connector utilized;                      A “P” indicates a pigtail with Amp connector and no letter indicates the use of a case-mounted MS Cannon connector.		  
Weight: 3.65 lb / 1.66 kg
Dimensions: 10.6" x 5.1" x 5.8" / 27.0cm x 13.0cm x 14.7cm (l,w,d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual

 
EN-B41MT-xx Mid/Tweet Enclosure
The EN-B41MT-xx is a high quality 5” coaxial speaker consisting of a mylar tweeter and 5” mid-bass driver. Right and left versions of the same enclosure. Black powder-coat enamel finish.   
Weight: 3.65 lb / 1.66 kg
Dimensions: 10.6" x 5.1" x 5.8" / 27.0cm x 13.0cm x 14.7cm (l,w,d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual      


EN-MT-45A Mid/Tweet Enclosure
A 1" material dome tweeter with neodymium magnet structure and a 3.5" midrange speaker in a single unit.  Crossover network that separates high and low range.  
Weight: 1.85 lb / 0.84 kg
Dimensions: 11.0" x 3.5" x 2.0" / 27.9cm x 8.9cm x 5.1cm (l,w,d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheet      Inst. & Operation Manual


EN-MT-60-x Mid/Tweet Enclosure
A 1" material dome tweeter with neodymium magnet structure and a 3.5" midrange speaker in a single unit.
Crossover network that separates high and low range. 		 
Weight: 1.85 lb / 0.84 kg
Dimensions: 8.25" x 4.3" x 2.46" / 21.0cm x 10.9cm x 6.3cm (l, w, d)
Power: 40 WRMS
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual      

 

Back to the Top...