Video Converters, Controllers, and Components

 
AI-NV002-01-x Video On/Off Mechanism Controller
Designed to provide motor control (extending and retracting) for AI's LCD 6.5" in-seat monitor. Provides the on/off controls for the video monitor mechanism. Features reverse voltage protection, delayed power reset, variable time shutoff during opening and closing, variable motor speed control, monitor supply switch output, video input BNC connector, and 5 second power interrupt protection.

The “-x” suffix denotes the type of connector utilized;                              “-1” = Positronic and “-2” = D-Subminiature. 		 
Weight: 0.42 lb / 0.19 kg
Dimensions: 3.1" x 5.0" x 1.1" / 7.87cm 12.7cm x 2.79cm (l,w,h)
Power Requirements: 45 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet      Installation Manual


AI-VC-101  Video Controller
Provides the needed signal to convert SECAM, PAL, MESECAM, and NTSC video input standard into NTSC output of 3.58. +28 VDC operation.

-101 is a Positronic connector.
Weight: 1.52 lb / 0.69 kg
Dimensions: 8.0" x 9.4" x 1.7" / 20.32cm x 23.88cm x 4.3cm (l,w,h)
Power Requirements: 290 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet      Installation Manual       



AI-VC-102 Video Controller
Provides the needed signal to convert SECAM, PAL, MESECAM, and NTSC video input standard into NTSC output of 3.58. +28 VDC operation.

-102 is a D-Subminiature connector.
Weight: 1.52 lb / 0.69 kg
Dimensions: 8.0" x 9.4" x 1.7" / 20.32cm x 23.88cm x 4.3cm (l,w,h)
Power Requirements: 290 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet      Installation Manual       


AI-VC-202-x Video Converter

Audio International's AI-VC-202-x provides automatic conversion of video graphics array (VGA) video input standard into NTSC composite output.  
     The A/VOD signal is streamed over an Ethernet network using MPEG compression.  The Electronic Control Unit module converts the MPEG compression to separate VGA and audio signal outputs which are then routed via the AI-VC-202-x module to the proper audio and video system distribution modules. One possible usage of the AI-VC-202-x is to allow for distribution of a broadcast Audio/Video-On-Demand (A/VOD) signal for use with cabin audio and video distribution. 

The “-x” suffix denotes the type of connector utilized;  
"-1” = Positronic and “-2” = D-Subminiature.
Weight: 1.0 lb / 0.45 kg
Dimensions: 5.0" x 4.5" x 1.8" / 12.7cm x 11.43cm x 4.57cm (l,w,h)
Power Requirements: 150mA NOMINAL @ +28 Vdc / 300 mA MAXIMUM @ +28 Vdc
Documentation: Drawings/Spec Sheet    Installation Manual       


MSM2831 Video Control Module

The MSM2831 allows selection control for two to five video sources and Airshow mode selection.  The unit is capable of selecting video sources and Airshow mode functions randomly or in sequence. The MSM2831 may be used with AI-MSM2815 Infrared Interface Module, IFR-9A Infrared Receiver, and AI-RC1-170xxx IR Hand-Held Remote Control to provide infrared remote control for video and Airshow selection.

  
Weight: 0.50 lb / 0.23 kg
Dimensions: 5.0" x 5.0" x 1.0" / 12.7cm x 12.7cm x 2.54 cm (l,w,h)
Power Requirements: 165 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet       Inst. & Operation Manual



VCF-101-01-x Video Conditioning Filter

   Audio International’s VCF-101-01-x is a video conditioning filter designed to minimize video tearing caused by DC offset created by isolation transformers handling ground loop noise.  In the recommended installation, the unit receives video signals from the source equipment (such as a VCP or DVD), filters the signals to the audio/video module (such as an LCD monitor), and enables viewers to enjoy a high-quality display without sacrificing audio or video performance. 

   Simple design allows for versatile connection options; the VCF-101-01-x can be mounted in either a horizontal or vertical position with no loss of functionality.  It comes in a brushed aluminum housing with iridite finish.

The “-x” suffix denotes the type of connector utilized; 
“-1” = Positronic and “-2” = D-Subminiature.
Weight: 1.7 lb / 0.77 kg
Dimensions: 3.6" x 1.63" x 0.88" / 9.14cm x 4.14cm x 2.2cm (l,w,h)
Power Requirements: N/A
Documentation: Drawings/Spec Sheet      Installation Manual

 

Back to the Top...