Video Distribution

 

MSM2925-01-x Video Distribution Module
   Provides conversion of differential video signals to single ended video signals and then provides that video to more than one destination. 4 channel inputs with dip switch termination, 8 channel outputs (2 outputs per channel) with level adjustments. Low impedance video drivers to overcome noise interference.

The “-x” suffix denotes the type of connector utilized;                            “-1” = Positronic and “-2” = D-Subminiature.
Weight: 0.8 lb / 0.4 kg
Dimensions: 3.17" x 7.79" x 1.36" / 8.05cm x 19.79cm x 3.45cm (l,w,h)
Power Requirements: 250 mA @ +28 Vdc
Documentation: Drawings/Spec Sheet    Installation Manual


VA-400-1 (-NT) Video Distribution Amp

    The VA-400-1 (NT) provides the needed signal to drive four video receivers (standard configuration).  This amplifier is ideal for driving multiple monitors from one video source.  The amplifier may be cascaded for additional flexibility.  The VA-400-1 (NT) is an active device that requires only power and ground connections. 

The NT designates non-termination of the input.  This is an available option. 
Weight: 0.39 lb / 0.18 kg
Dimensions: 3.1" x 5.0" x 1.05" / 7.9cm x 12.7cm x 2.7cm (l,w,h)
Power Requirements: 250 mA @ +28 Vdc 
Documentation: Drawings/Spec Sheet      Installation Manual

 

VA-401-x Video Distribution Amp

    Audio International’s VA-401-x provides four buffered video outputs from a single video input.  The module can be configured to provide 75Ω input impedance or high input impedance.  The amplifier may be cascaded for additional flexibility.  The VA-401-x is an active device requiring only power and ground connections.  All composite video standards (NTSC, PAL, SECAM, etc.) are compatible.

The “-x” suffix denotes the type of connector utilized;                            “-1” = Positronic and “-2” = D-Subminiature.
Weight: 0.6 lb / 0.27 kg
Dimensions: 3.1" x 5.0" x 1.05" / 7.9cm x 12.7cm x 2.7cm (l,w,h)
Power Requirements: 200 mA @ +28 Vdc 
Documentation: Drawings/Spec Sheet      Installation Manual


Back to the Top...